Color temperature selectable Batten Light with microwave sensor

Short Description:

1.Quality white powder coated finish with robustpolycarbonate diffuser

2. Large 16mm 2 terminal block, easy installation withcentral cable entry

3.High efficiency SMD LED chips, CRI> 80, 120 degreebeam distribution

4. Sliders at both ends open, easy maintaince

5. Integral constant current non-dimmable LED driver

6. Easy selectable colour changing temperature (CCT)with an inbuilt switch 3000K,4000K,6500K

7.Selectable power adjustment with an inbuilt switch

8.Steel body 70mm wide

9. Microwave sensor:

Detection Range: 4m

Detection Angle: 140 degrees

Duration Time: 2 minute, subsequent detection will restart

the minutetimer.

Manual override function: On/off 10 times then the lightwill stay on after gone into manual override function. Turnthe main power off for 30 seconds will turn off the Manualoverride function. When turn on power again after 30seconds the light will work as AUTO mode (normal mode)

Send email to us

Spec & Models

Service

Technical Parameter

Input Voltage	200-240V	CRI (Ra>)	80, 90
Power Factor	>0.9	Working Frequency	50/60HZ
Wide	70mm	Height	70mm
Temperature	-20～50℃	Lifetime	30000h
IP Rating	IP20	Materials	Steel(base),PC(diffuser)
Light Source	LED	LED Chip	SMD 2835
CCT	Single CCT (3000K-6500K)	Beam Angle	120°
Light Color	White	Installation	Surface Mounted

Models

Model	Power	Length	Luminous Efficiency	Luminous	Dimmable	CCT
BL01-0.6-12/15/18/20-3CCT-MS	12/15/18/20W Switchable	0.6m	100lm/w	2000lm(MAX)	Optional	3000K-6500K
BL01-1.2-24/30/35/40-3CCT-MS	24/30/35/40W Switchable	1.2m	100lm/w	4000lm(MAX)	Optional	3000K-6500K
BL01-1.5-33/43/52/60-3CCT-MS	33/43/52/60W Switchable	1.5m	100lm/w	6000lm(MAX)	Optional	3000K-6500K